<?xml version="1.0" encoding="UTF-8"?>
<otherdata xmlns="http://linux.duke.edu/metadata/other" packages="16">
<package pkgid="f248b5e7596c3c0a8322161fc0d04168da22074b9d4ee69920a420f615906fd4" name="SuSEfirewall2-snat" arch="noarch">
  <version epoch="0" ver="1.5" rel="6.35"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="8bc6baecb687d34f416f9e4a986965519e6439a72dd8f2d31f7968876849dba0" name="SuSEfirewall2-snat" arch="src">
  <version epoch="0" ver="1.5" rel="6.35"/>
  <changelog author="kurt@garloff.de" date="1486036800">- Initial creation of package SuSEfirewall2-snat
- Add post, preun, postun
- Mark script as %config file (it is adapted by setup_snat.sh)</changelog>
  <changelog author="kurt@garloff.de" date="1486036801">- Fix typo in repl_custom()
- enable on install</changelog>
  <changelog author="kurt@garloff.de" date="1486036802">- Create int and dmz zones if needed (by assigning fake ifaces).</changelog>
  <changelog author="kurt@garloff.de" date="1486123200">- Custom inclass routing rule when using internal/dmznet.</changelog>
  <changelog author="kurt@garloff.de" date="1486123201">- Avoid spurious inclass routing if not needed.
- Optional verbose output.
- Avoid error when no userdata is available.</changelog>
  <changelog author="kurt@garloff.de" date="1486209600">- Support addip:</changelog>
  <changelog author="kurt@garloff.de" date="1486728000">- Update to 1.0:
  Move all custom settings one level down under the otc: struct.</changelog>
  <changelog author="kurt@garloff.de" date="1487937600">- Add snat_addip.sh, a simple failover daemon for the virtual IP.
- Not yet used.</changelog>
  <changelog author="kurt@garloff.de" date="1487937601">- Version 1.1:
  * Using simple failover daemon to avoid double VIP binding.
  * Rename setup_snat to snat_setup.</changelog>
  <changelog author="kurt@garloff.de" date="1489752000">- Version 1.2:
  * Add support for PRIVATENET.</changelog>
  <changelog author="kurt@garloff.de" date="1489838400">- Version 1.3:
  * Support PROVIDERNET.
  * Support otc.addroute.</changelog>
  <changelog author="kurt@garloff.de" date="1511956800">- Version 1.4:
  * Fix PRIVATENET (172.16 missed the /12).
  * Speedup by reading userdata from file if present.
  * Check for SFW2 changes before restarting (speedup).</changelog>
  <changelog author="kurt@garloff.de" date="1518696000">- Be more verbose, allowing to debug occasionally slow startup.</changelog>
  <changelog author="kurt@garloff.de" date="1528891200">- Version 1.5:
  * We need to insert more custom forwarding rules to allow return
    packets to be forwarded to the internal net on the same iface.
  * Move scripts to /opt/otc/snat/</changelog>
  <changelog author="kurt@garloff.de" date="1538481600">- Increase timeout -- the SFW2 restart can be slow at times.
- Avoid depending on otc-tools.</changelog>
</package>
<package pkgid="2ec107ba13696a656a99798ba003fee585044f8535eac41d91f25a1d940edde2" name="bms-network-setup" arch="noarch">
  <version epoch="0" ver="1.11" rel="27.35"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="ce69cf4d8cb0f073980847b963b770cfecc15732c6acb72d9ee831e270cdb517" name="bms-network-setup" arch="src">
  <version epoch="0" ver="1.11" rel="27.35"/>
  <changelog author="sabrina-mueller@t-systems.com" date="1642593600">- Add BMS support for OTC Debian 11.
  * only allow dataSource openTelekomCloud or openStack</changelog>
  <changelog author="robert.borso@t-systems.com" date="1673352000">- Add BMS support for OTC Alma and Rocky linux 8, 9.</changelog>
  <changelog author="sabrina-mueller@t-systems.com" date="1697457600">- Fix network configuration for additional VLAN interfaces,
  as some distributions leave interfaces down if unknown interface
  options are configured.</changelog>
</package>
<package pkgid="54f29c3462f6f0e9299c75fd8332f1f799bc8bb6462d66734dc9cee6f3158a48" name="cloud-multiroute" arch="noarch">
  <version epoch="0" ver="0.8" rel="11.177"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="1b28474c7aa2313081450e32915aceacc0a5793a687f78a36a2a01f478c3ea87" name="cloud-multiroute" arch="src">
  <version epoch="0" ver="0.8" rel="11.177"/>
  <changelog author="kurt@garloff.de" date="1489320000">- Create cloud-multiroute package to set up multiple routing tables.</changelog>
  <changelog author="kurt@garloff.de" date="1489320001">- Add debugging options.</changelog>
  <changelog author="kurt@garloff.de" date="1489320002">- Bugfixes:
  * shyaml returns "True", not "true".
  * Use own gateway in guessgw mode.</changelog>
  <changelog author="kurt@garloff.de" date="1528459200">- Add rtdefl.sh helper.
- Move scripts to sbindir.</changelog>
</package>
<package pkgid="39550c4ba1b59a3c7ab4107587ad49a42231072ddb8a9418cb8866e156b41e01" name="cloud-otc-keyring" arch="noarch">
  <version epoch="0" ver="2025.1.0" rel="1.101"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="b3f36498131132bea9c5c94d49b5ee73a6fb7544f3bf45ac2a2114225f90f0bd" name="cloud-otc-keyring" arch="src">
  <version epoch="0" ver="2025.1.0" rel="1.101"/>
  <changelog author="Sabrina Mueller &lt;sabrina-mueller@t-systems.com&gt;" date="1730203200">- extension of GPG key</changelog>
</package>
<package pkgid="4e2b18b05af18ca6578c36cd398f2a31a4e8c74f4ed1cb41b087d4b3c11146f9" name="libxenstore_uvp3_0" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.167"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="8aa290a2a5f69ca035abd370fffe714f02ab05e707ad4b7b9029604696f12ce6" name="network-hotplug" arch="noarch">
  <version epoch="0" ver="0.4" rel="2.35"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="b28ea9b78246241c09def8752ada53b1bf8b4686520f484257dd80e13102e2ba" name="network-hotplug" arch="src">
  <version epoch="0" ver="0.4" rel="2.35"/>
  <changelog author="kurt@garloff.de" date="1539172800">- Update to network-hotplug-0.3:
  * Enable setup of all interfaces (also if ending with 0); we have
    protection against overwriting preexisting ifcfg files.
  * Only ifup if network config service is already completed.
  * Remove ifcfg- if we generated it upon hotunplug.</changelog>
  <changelog author="Johannes Schischke &lt;johannes.schischke@t-systems.com&gt;" date="1601640000">- only use hotplug mode for eth, ens and enp interfaces
- deactivated removal of docker/kubernetes interfaces</changelog>
</package>
<package pkgid="96842db952b63d637e3a3ecf4478b5ab71490c1e201e832dc1ce57ad526a7899" name="otc-tools" arch="noarch">
  <version epoch="0" ver="0.8.34" rel="11.33"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="fea18093d0b83965279a4dcac0bb8cfab4ba0def216f64ea747362de01df998f" name="otc-tools" arch="src">
  <version epoch="0" ver="0.8.34" rel="11.33"/>
  <changelog author="kurt@garloff.de" date="1660564800">- otc-tools-0834-setrecord.diff:
  Add support for otc.sh domain setrecord to update existing recs.
  Also support passing record names instead of of record ids in
  setrecord, showrecord, deleterecord.</changelog>
</package>
<package pkgid="39dda4fa237750f389accb7e61c0f5c00a5ac90d2f884033838ac0b06626cbd5" name="xenstore_uvp" arch="src">
  <version epoch="0" ver="3.0.0" rel="39.167"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="3525c24d8e7074e69caf944c4e16c6b235f72f6c2d99fc0d431177dedda27d4b" name="xenstore_uvp" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.167"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
<package pkgid="5b2ef4e6b35b31fa5da1633523edd1d06e081921fa13db55fd5377cbe71a987e" name="xenstore_uvp-devel" arch="x86_64">
  <version epoch="0" ver="3.0.0" rel="39.167"/>
  <changelog author="kurt@garloff.de" date="1467374400">- Fix build on arm32/64.</changelog>
  <changelog author="kurt@garloff.de" date="1528804800">- Rename binaries to xenstore_uvp and xenstore-control_uvp to
  avoid conflicts with stock distro package.</changelog>
</package>
</otherdata>