<?xml version="1.0" encoding="UTF-8"?>
<metadata xmlns="http://linux.duke.edu/metadata/common" xmlns:rpm="http://linux.duke.edu/metadata/rpm" packages="45">
<package type="rpm">
  <name>SuSEfirewall2-snat</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.5" rel="6.5"/>
  <checksum type="sha512" pkgid="YES">fb8b1b982abc04c491bebe370a70a0268d0483829e1b3d1d64e8b0668c0fb8af48b0ceae5b238645af1cc2572f005eb7748b1ef3f98dac54b4b9f1f4d91f4365</checksum>
  <summary>SNAT helper scripts configuring SNAT instance from user_data</summary>
  <description>This package brings a script that parses some YAML in user_data and creates an SNAT i
setup as instructed by it.

It uses SuSEfirewall2 and extends it ...</description>
  <packager></packager>
  <url></url>
  <time file="1787869193" build="1538493418"/>
  <size package="17988" installed="24351" archive="25460"/>
  <location href="noarch/SuSEfirewall2-snat-1.5-6.5.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>SuSEfirewall2-snat-1.5-6.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10277"/>
    <rpm:provides>
      <rpm:entry name="SuSEfirewall2-snat" flags="EQ" epoch="0" ver="1.5" rel="6.5"/>
      <rpm:entry name="config(SuSEfirewall2-snat)" flags="EQ" epoch="0" ver="1.5" rel="6.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="SuSEfirewall2"/>
      <rpm:entry name="shyaml"/>
      <rpm:entry name="systemd" pre="1"/>
      <rpm:entry name="systemd"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="otc-tools"/>
    </rpm:recommends>
    <file type="dir">/etc/sysconfig/scripts</file>
    <file>/etc/sysconfig/scripts/SuSEfirewall2-snathelper</file>
  </format>
</package>
<package type="rpm">
  <name>SuSEfirewall2-snat</name>
  <arch>src</arch>
  <version epoch="0" ver="1.5" rel="6.5"/>
  <checksum type="sha512" pkgid="YES">1f7fe2ab4b52170a5549925e36c1392cedcf2287bd7bb48ce23920934a0e5bee3ee9abe865784d884a952c7966e8a352f6e1863b3c50a92a53c0b8d14b785322</checksum>
  <summary>SNAT helper scripts configuring SNAT instance from user_data</summary>
  <description>This package brings a script that parses some YAML in user_data and creates an SNAT i
setup as instructed by it.

It uses SuSEfirewall2 and extends it ...</description>
  <packager></packager>
  <url></url>
  <time file="1787869193" build="1538493418"/>
  <size package="22643" installed="28012" archive="28796"/>
  <location href="src/SuSEfirewall2-snat-1.5-6.5.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="13423"/>
    <rpm:provides>
      <rpm:entry name="SuSEfirewall2-snat" flags="EQ" epoch="0" ver="1.5" rel="6.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="systemd"/>
      <rpm:entry name="systemd-rpm-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>bms-network-setup</name>
  <arch>noarch</arch>
  <version epoch="0" ver="1.8" rel="11.1"/>
  <checksum type="sha512" pkgid="YES">6ff4b9a58f28063c6c10b36058737b02ada9373e36559aad3da7236ac82d60a02329faf07d70d04f68c035b45007a933384c70ca72be71550a61ded8fb4b8d91</checksum>
  <summary>OTC Bare Metal Network Device Configuration Scripts</summary>
  <description>Simple creation of ifcfg from ConfigDrive DataSource

This is a much simpler version of Huawei's bms-network-config, which can do a
lot more.  This script is simple and does nothing more than writing out ifcfg-*
files from the network_data.json configuration.  It is designed to coexist with
cloud-init.</description>
  <packager></packager>
  <url>https://github.com/bms-network/bms-network-config</url>
  <time file="1606476480" build="1606476460"/>
  <size package="21716" installed="25597" archive="26860"/>
  <location href="noarch/bms-network-setup-1.8-11.1.noarch.rpm"/>
  <format>
    <rpm:license>CC-BY-SA-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Tools</rpm:group>
    <rpm:buildhost>armbuild10</rpm:buildhost>
    <rpm:sourcerpm>bms-network-setup-1.8-11.1.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="5096" end="13752"/>
    <rpm:provides>
      <rpm:entry name="bms-network-setup" flags="EQ" epoch="0" ver="1.8" rel="11.1"/>
      <rpm:entry name="config(bms-network-setup)" flags="EQ" epoch="0" ver="1.8" rel="11.1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/env"/>
      <rpm:entry name="cloud-init"/>
      <rpm:entry name="insserv" pre="1"/>
      <rpm:entry name="python3"/>
      <rpm:entry name="python3-six"/>
      <rpm:entry name="sed" pre="1"/>
      <rpm:entry name="sysconfig" pre="1"/>
    </rpm:requires>
    <file type="dir">/etc/cloud</file>
    <file type="dir">/etc/cloud/cloud.cfg.d</file>
    <file type="ghost">/etc/cloud/cloud.cfg.d/91_bms_netdisable.cfg</file>
    <file type="ghost">/etc/cloud/cloud.cfg.d/92_bms_configdrivedisable.cfg</file>
    <file type="ghost">/etc/is_bms</file>
  </format>
</package>
<package type="rpm">
  <name>bms-network-setup</name>
  <arch>src</arch>
  <version epoch="0" ver="1.8" rel="11.1"/>
  <checksum type="sha512" pkgid="YES">cf4fab858db1e369f1311eafb7845d0aec96c628402b22f1f7899bf9de513d382f68165b7d610676dcab362494814bc4b1a1e55108d2a8221b382773d2706d14</checksum>
  <summary>OTC Bare Metal Network Device Configuration Scripts</summary>
  <description>Simple creation of ifcfg from ConfigDrive DataSource

This is a much simpler version of Huawei's bms-network-config, which can do a
lot more.  This script is simple and does nothing more than writing out ifcfg-*
files from the network_data.json configuration.  It is designed to coexist with
cloud-init.</description>
  <packager></packager>
  <url>https://github.com/bms-network/bms-network-config</url>
  <time file="1606476480" build="1606476460"/>
  <size package="29312" installed="23112" archive="23916"/>
  <location href="src/bms-network-setup-1.8-11.1.src.rpm"/>
  <format>
    <rpm:license>CC-BY-SA-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Tools</rpm:group>
    <rpm:buildhost>armbuild10</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="5096" end="13384"/>
    <rpm:requires>
      <rpm:entry name="systemd"/>
      <rpm:entry name="systemd-rpm-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>cloud-multiroute</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.8" rel="11.52"/>
  <checksum type="sha512" pkgid="YES">5b3f52ee770f926b816e97386a385f8402d10866084677fcc26c8d1ecfb6bc03dfe0483767654b1e0cab883cbee21fd0e28934f4ca5d8da16706ce6f91977dba</checksum>
  <summary>Setting up multiple routing tables controlled by user_data</summary>
  <description>When having several NICs in a cloud VM, we may want to use all of them fully.
In Linux, this needs multiple routing tables, if
(a) we have several NICs in one subnet OR
(b) we want to have several default routes.
This script creates these routes controlled by settings from cloud-init user_data.
otc:
   multiroute: true
enables this for case (a).
   multiroute: guessgw
also enables case (b) by guessing the gateway address for NICs in other subnets.</description>
  <packager></packager>
  <url></url>
  <time file="1787869447" build="1528443560"/>
  <size package="11646" installed="8131" archive="8828"/>
  <location href="noarch/cloud-multiroute-0.8-11.52.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>cloud-multiroute-0.8-11.52.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8413"/>
    <rpm:provides>
      <rpm:entry name="cloud-multiroute" flags="EQ" epoch="0" ver="0.8" rel="11.52"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="shyaml"/>
      <rpm:entry name="systemd" pre="1"/>
      <rpm:entry name="systemd"/>
    </rpm:requires>
    <file>/usr/sbin/cloud-multiroute.sh</file>
    <file>/usr/sbin/rtdefl.sh</file>
    <file>/usr/sbin/rttbl2.sh</file>
  </format>
</package>
<package type="rpm">
  <name>cloud-multiroute</name>
  <arch>src</arch>
  <version epoch="0" ver="0.8" rel="11.52"/>
  <checksum type="sha512" pkgid="YES">fa2d3f98795c94bfafc893e251e3b8c9baae16062e9d46718eca21b83e920508e90bd5c881f00675b0540eb724f6a3463fcd051a5e96ba5d8e2dd683611c37f4</checksum>
  <summary>Setting up multiple routing tables controlled by user_data</summary>
  <description>When having several NICs in a cloud VM, we may want to use all of them fully.
In Linux, this needs multiple routing tables, if
(a) we have several NICs in one subnet OR
(b) we want to have several default routes.
This script creates these routes controlled by settings from cloud-init user_data.
otc:
   multiroute: true
enables this for case (a).
   multiroute: guessgw
also enables case (b) by guessing the gateway address for NICs in other subnets.</description>
  <packager></packager>
  <url></url>
  <time file="1787869447" build="1528443560"/>
  <size package="14108" installed="10261" archive="11032"/>
  <location href="src/cloud-multiroute-0.8-11.52.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="10022"/>
    <rpm:provides>
      <rpm:entry name="cloud-multiroute" flags="EQ" epoch="0" ver="0.8" rel="11.52"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="systemd"/>
      <rpm:entry name="systemd-rpm-macros"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>corkscrew</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="2.0" rel="1.50"/>
  <checksum type="sha512" pkgid="YES">cf1013a5c09d70a39f78d9eeaaac66a650e681ce48e58f123f941ae0afc59af03b021d910b835fe9e73f5c7722d273f9f3ac76bf000071999650dc77c3b00e2d</checksum>
  <summary>Tunnel SSH through HTTP Proxies</summary>
  <description>Corkscrew is a tool for tunneling SSH through HTTP proxies.
Corkscrew has been tested against several proxies requiring HTTP
authentication. Several flaws exist as only basic authentication is currently
supported. Digest authentication may be supported in the future. NTLM
authentication will most likely never be supported.


Authors:
--------
    Pat Padgett &lt;agroman@agroman.net&gt;</description>
  <packager></packager>
  <url>http://www.agroman.net/corkscrew/</url>
  <time file="1723016266" build="1494950506"/>
  <size package="21686" installed="93805" archive="94992"/>
  <location href="aarch64/corkscrew-2.0-1.50.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>corkscrew-2.0-1.50.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8429"/>
    <rpm:provides>
      <rpm:entry name="corkscrew" flags="EQ" epoch="0" ver="2.0" rel="1.50"/>
      <rpm:entry name="corkscrew(aarch-64)" flags="EQ" epoch="0" ver="2.0" rel="1.50"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/corkscrew</file>
  </format>
</package>
<package type="rpm">
  <name>corkscrew</name>
  <arch>src</arch>
  <version epoch="0" ver="2.0" rel="1.50"/>
  <checksum type="sha512" pkgid="YES">a31b877044698d95cbabf009fedb1f3d391ccdd8139de857a13592a3d5f3d20528e733a935dda9cace30615b641a64b9f1d95f841e1d6a1fb8c5a3bf8f9c38cb</checksum>
  <summary>Tunnel SSH through HTTP Proxies</summary>
  <description>Corkscrew is a tool for tunneling SSH through HTTP proxies.
Corkscrew has been tested against several proxies requiring HTTP
authentication. Several flaws exist as only basic authentication is currently
supported. Digest authentication may be supported in the future. NTLM
authentication will most likely never be supported.


Authors:
--------
    Pat Padgett &lt;agroman@agroman.net&gt;</description>
  <packager></packager>
  <url>http://www.agroman.net/corkscrew/</url>
  <time file="1723016266" build="1494950506"/>
  <size package="63345" installed="53622" archive="54012"/>
  <location href="src/corkscrew-2.0-1.50.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Productivity/Security</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="10151"/>
    <rpm:provides>
      <rpm:entry name="corkscrew" flags="EQ" epoch="0" ver="2.0" rel="1.50"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="autoconf"/>
      <rpm:entry name="automake"/>
      <rpm:entry name="gcc"/>
      <rpm:entry name="glibc-devel"/>
      <rpm:entry name="libtool"/>
      <rpm:entry name="make"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>jq</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">29d64c71534f263aaa32d3b7d3fc7b9bdbd093007c402c184d6ecce1210deaf3269c7074736dc96703b0e5578738ffcf1ba33df0ede9b401a5d316ca8719ee91</checksum>
  <summary>A lightweight and flexible command-line JSON processor</summary>
  <description>A lightweight and flexible command-line JSON processor. jq is like sed for
JSON data – you can use it to slice and filter and map and transform
structured data with the same ease that sed, awk, grep and friends let
you play with text.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288887" build="1562261233"/>
  <size package="67897" installed="150383" archive="151784"/>
  <location href="aarch64/jq-1.6-4.15.96.aarch64.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Productivity/Text/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="11561"/>
    <rpm:provides>
      <rpm:entry name="jq" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="jq(aarch-64)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libjq.so.1()(64bit)"/>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/jq</file>
  </format>
</package>
<package type="rpm">
  <name>jq</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">ae779f945684f842f77a2cd3fd25459913039fc1132c821c8bec594fdf7f1e2764a22d0934821e649094f6757a652fbee30f7c5615cc4b88ce6cc8ed4690ff1e</checksum>
  <summary>A lightweight and flexible command-line JSON processor</summary>
  <description>A lightweight and flexible command-line JSON processor. jq is like sed for
JSON data – you can use it to slice and filter and map and transform
structured data with the same ease that sed, awk, grep and friends let
you play with text.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288566" build="1562261233"/>
  <size package="67289" installed="98963" archive="100364"/>
  <location href="armv7hl/jq-1.6-4.15.96.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Productivity/Text/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="11525"/>
    <rpm:provides>
      <rpm:entry name="jq" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="jq(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ld-linux-armhf.so.3"/>
      <rpm:entry name="ld-linux-armhf.so.3(GLIBC_2.4)"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.5)"/>
      <rpm:entry name="libjq.so.1"/>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6"/>
      <rpm:entry name="libc.so.6(GLIBC_2.38)"/>
    </rpm:requires>
    <file>/usr/bin/jq</file>
  </format>
</package>
<package type="rpm">
  <name>jq</name>
  <arch>src</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">83e2fef6c1826e1a3e55173fad4676a1a58edd912d3e05ebdd67f1a2a05c7b52fe5f898bb62f62cdff3d14d7d834bc63500823c7c55d6807f24712d0149a3a06</checksum>
  <summary>A lightweight and flexible command-line JSON processor</summary>
  <description>A lightweight and flexible command-line JSON processor. jq is like sed for
JSON data – you can use it to slice and filter and map and transform
structured data with the same ease that sed, awk, grep and friends let
you play with text.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288566" build="1562261233"/>
  <size package="1212266" installed="1198130" archive="1198500"/>
  <location href="src/jq-1.6-4.15.96.src.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Productivity/Text/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="17387"/>
    <rpm:provides>
      <rpm:entry name="jq" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq-devel" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="jq-debuginfo" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="jq-debugsource" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="chrpath"/>
      <rpm:entry name="flex"/>
      <rpm:entry name="oniguruma-devel"/>
      <rpm:entry name="valgrind"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>jq-debuginfo</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">d62162a363a31181d41b81d9a88fd8a3231750c1a3a50418460f58ad4ff299512c7d8c35f5b100c41224c2a65e1f7e35b6d253304f4a3ac95fbefbaa3992d140</checksum>
  <summary>Debug information for package jq</summary>
  <description>This package provides debug information for package jq.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288566" build="1562261233"/>
  <size package="15198" installed="29417" archive="31012"/>
  <location href="armv7hl/jq-debuginfo-1.6-4.15.96.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="11209"/>
    <rpm:provides>
      <rpm:entry name="debuginfo(build-id)" flags="EQ" epoch="0" ver="4299de369954499e92a5ab2e38d141170c6eec5a"/>
      <rpm:entry name="jq-debuginfo" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="jq-debuginfo(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:recommends>
      <rpm:entry name="jq-debugsource(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:recommends>
    <file>/usr/lib/debug/usr/bin/jq.debug</file>
  </format>
</package>
<package type="rpm">
  <name>libjq-devel</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">f05893bba2ebfd15a7394545015b8ca683b611e5e5effb0201b5f37b03f4b4a90b979fb2bdd4b174da5006703c366663cb6f96dc618e4c50c6e9a1f6c031efee</checksum>
  <summary>Development files for jq</summary>
  <description>Development files (headers and libraries for jq).</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288887" build="1562261233"/>
  <size package="12945" installed="12432" archive="12956"/>
  <location href="aarch64/libjq-devel-1.6-4.15.96.aarch64.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9841"/>
    <rpm:provides>
      <rpm:entry name="libjq-devel" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq-devel(aarch-64)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libjq-devel</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">48ce27b1d10f04883cb1b415cabb019c266e412d95f46881f9133e8748c13b548a7f11fc70c45f0ad03b79f91d99a291f7a089e042895fbd97b0bebb75746139</checksum>
  <summary>Development files for jq</summary>
  <description>Development files (headers and libraries for jq).</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288566" build="1562261233"/>
  <size package="12911" installed="12432" archive="12956"/>
  <location href="armv7hl/libjq-devel-1.6-4.15.96.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/C and C++</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9813"/>
    <rpm:provides>
      <rpm:entry name="libjq-devel" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq-devel(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libjq1</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">7cccbb6c13280f4a0f1d358d072c2bb13fadaee292bb5a0106b9f8532a48abc476b588152fd7487589dd0d7fc65f4b7613ba6bcbf64a27febdb1014006028584</checksum>
  <summary>Library for a lightweight and flexible command-line JSON processor</summary>
  <description>Library for a lightweight and flexible command-line JSON processor.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288887" build="1562261233"/>
  <size package="131723" installed="364846" archive="365248"/>
  <location href="aarch64/libjq1-1.6-4.15.96.aarch64.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10641"/>
    <rpm:provides>
      <rpm:entry name="libjq.so.1()(64bit)"/>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq1(aarch-64)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libm.so.6()(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.23)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.29)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.35)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.38)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.39)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.43)(64bit)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.44)(64bit)"/>
      <rpm:entry name="libonig.so.5()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.33)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libjq1</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">93840623b5d0a1106439ad375455776ff8a0742ffd48c980def9581ad0a1f74e8bf3a92fca64c823268508abda303d1b0c7a20e0323c316af4b6168f073ade31</checksum>
  <summary>Library for a lightweight and flexible command-line JSON processor</summary>
  <description>Library for a lightweight and flexible command-line JSON processor.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288566" build="1562261233"/>
  <size package="132957" installed="312846" archive="313240"/>
  <location href="armv7hl/libjq1-1.6-4.15.96.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10569"/>
    <rpm:provides>
      <rpm:entry name="libjq.so.1"/>
      <rpm:entry name="libjq1" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq1(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-armhf.so.3"/>
      <rpm:entry name="ld-linux-armhf.so.3(GLIBC_2.4)"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.5)"/>
      <rpm:entry name="libm.so.6"/>
      <rpm:entry name="libm.so.6(GLIBC_2.23)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.29)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.35)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.38)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.39)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.4)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.43)"/>
      <rpm:entry name="libm.so.6(GLIBC_2.44)"/>
      <rpm:entry name="libonig.so.5"/>
      <rpm:entry name="libc.so.6(GLIBC_2.33)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libjq1-debuginfo</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="1.6" rel="4.15.96"/>
  <checksum type="sha512" pkgid="YES">b2e7aa75fb587a9b2148e18ac12ab972910e5a66c0fd606ead8be040b4269cda2be2989c4371ec2ba6e9dcedb3d8145ba2ace19934c6c3ac2dd037555dfdc207</checksum>
  <summary>Debug information for package libjq1</summary>
  <description>This package provides debug information for package libjq1.
Debug information is useful when developing applications that use this
package or when debugging this package.</description>
  <packager></packager>
  <url>http://stedolan.github.io/jq/</url>
  <time file="1788288567" build="1562261233"/>
  <size package="27010" installed="53502" archive="54824"/>
  <location href="armv7hl/libjq1-debuginfo-1.6-4.15.96.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT AND CC-BY-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Debug</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>jq-1.6-4.15.96.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10877"/>
    <rpm:provides>
      <rpm:entry name="debuginfo(build-id)" flags="EQ" epoch="0" ver="aa23b9dc4b6c3c768eeac9ee9e75d1b2737bf687"/>
      <rpm:entry name="libjq1-debuginfo" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
      <rpm:entry name="libjq1-debuginfo(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="jq-debuginfo(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="jq-debugsource(armv7hl-32)" flags="EQ" epoch="0" ver="1.6" rel="4.15.96"/>
    </rpm:recommends>
  </format>
</package>
<package type="rpm">
  <name>libs3-4</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="4.1" rel="33.13"/>
  <checksum type="sha512" pkgid="YES">06c97b94f65bb8562356dbc0b3b8e44018b2268c6f204d2bf8c4c41c57e60f1820a35c52dffc0f71ae97e36111f6969da2468d3a19c74be31e809a1338a4af8f</checksum>
  <summary>C Library and Tools for Amazon S3 Access</summary>
  <description>This package includes the libs3 shared object library, needed to run
applications compiled against libs3, and additionally contains the s3
utility for accessing Amazon S3.</description>
  <packager></packager>
  <url>http://sourceforge.net/projects/reallibs3</url>
  <time file="1787866451" build="1777747754"/>
  <size package="69732" installed="212777" archive="214056"/>
  <location href="aarch64/libs3-4-4.1-33.13.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>libs3-4.1-33.13.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9513"/>
    <rpm:provides>
      <rpm:entry name="libs3-4" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3-4(aarch-64)" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3.so.4()(64bit)"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libcrypto.so.3()(64bit)"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)(64bit)"/>
      <rpm:entry name="libcurl.so.4()(64bit)"/>
      <rpm:entry name="libxml2.so.16()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)(64bit)"/>
    </rpm:requires>
    <file>/usr/bin/s3</file>
  </format>
</package>
<package type="rpm">
  <name>libs3-4</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="4.1" rel="33.13"/>
  <checksum type="sha512" pkgid="YES">a045b9274e962725b0fc765566cc43bd83c8a3f3282fd3b29a04337100f123e87b70dc46f655a818d06aacfb762bdc12aad0b03c50957a2ecef58376d7febea7</checksum>
  <summary>C Library and Tools for Amazon S3 Access</summary>
  <description>This package includes the libs3 shared object library, needed to run
applications compiled against libs3, and additionally contains the s3
utility for accessing Amazon S3.</description>
  <packager></packager>
  <url>http://sourceforge.net/projects/reallibs3</url>
  <time file="1787868317" build="1777747754"/>
  <size package="69937" installed="153921" archive="155196"/>
  <location href="armv7hl/libs3-4-4.1-33.13.armv7hl.rpm"/>
  <format>
    <rpm:license>GPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>libs3-4.1-33.13.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9437"/>
    <rpm:provides>
      <rpm:entry name="libs3-4" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3-4(armv7hl-32)" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3.so.4"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-armhf.so.3"/>
      <rpm:entry name="ld-linux-armhf.so.3(GLIBC_2.4)"/>
      <rpm:entry name="libcrypto.so.3"/>
      <rpm:entry name="libcrypto.so.3(OPENSSL_3.0.0)"/>
      <rpm:entry name="libcurl.so.4"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.5)"/>
      <rpm:entry name="libxml2.so.16"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)"/>
    </rpm:requires>
    <file>/usr/bin/s3</file>
  </format>
</package>
<package type="rpm">
  <name>libs3</name>
  <arch>src</arch>
  <version epoch="0" ver="4.1" rel="33.13"/>
  <checksum type="sha512" pkgid="YES">4bb4668dea541f1901930e8eb682000262711b0736b007a45a9526c2ce2eabfb52bddcb9ad6bface4ce7223aca6714a51913fb2c74a9135272a69dd3e0606d67</checksum>
  <summary>C Library and Tools for Amazon S3 Access</summary>
  <description>Source for the S3 library, providing access to Amazon's S3 object storage.</description>
  <packager></packager>
  <url>http://sourceforge.net/projects/reallibs3</url>
  <time file="1787868317" build="1777747754"/>
  <size package="108534" installed="104571" archive="106036"/>
  <location href="src/libs3-4.1-33.13.src.rpm"/>
  <format>
    <rpm:license>GPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="14564"/>
    <rpm:provides>
      <rpm:entry name="libs3-4" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3-devel" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libcurl-devel"/>
      <rpm:entry name="libxml2-devel"/>
      <rpm:entry name="make"/>
      <rpm:entry name="openssl-devel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libs3-devel</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="4.1" rel="33.13"/>
  <checksum type="sha512" pkgid="YES">4bfa5b469fd00c169084f584bd2a082e9c0f0a7c2f961a639cd5b3da587e3ade0b17fb6e96eb490139f9f09dfd78ab5c779150ea3fc7bff4fea2f420d86dd023</checksum>
  <summary>Headers and documentation for libs3</summary>
  <description>This library provides an API for using Amazon's S3 service (see
http://s3.amazonaws.com).  Its design goals are:

 - To provide a simple and straightforward API for accessing all of S3's
   functionality
 - To not require the developer using libs3 to need to know anything about:
     - HTTP
     - XML
     - SSL
   In other words, this API is meant to stand on its own, without requiring
   any implicit knowledge of how S3 services are accessed using HTTP
   protocols.
 - To be usable from multithreaded code
 - To be usable by code which wants to process multiple S3 requests
   simultaneously from a single thread
 - To be usable in the simple, straightforward way using sequentialized
   blocking requests</description>
  <packager></packager>
  <url>http://sourceforge.net/projects/reallibs3</url>
  <time file="1787866451" build="1777747754"/>
  <size package="255902" installed="724773" archive="725296"/>
  <location href="aarch64/libs3-devel-4.1-33.13.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>libs3-4.1-33.13.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8473"/>
    <rpm:provides>
      <rpm:entry name="libs3-devel" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3-devel(aarch-64)" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libs3-4" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libs3-devel</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="4.1" rel="33.13"/>
  <checksum type="sha512" pkgid="YES">a1fe4cbaa939168bb38cb5bc20aa51d4bcdb4b722c716300ff730359075a7d6e2fb7077565e49c83a1486fecb804004d92b03633f0b22d4f631bb1df597e7830</checksum>
  <summary>Headers and documentation for libs3</summary>
  <description>This library provides an API for using Amazon's S3 service (see
http://s3.amazonaws.com).  Its design goals are:

 - To provide a simple and straightforward API for accessing all of S3's
   functionality
 - To not require the developer using libs3 to need to know anything about:
     - HTTP
     - XML
     - SSL
   In other words, this API is meant to stand on its own, without requiring
   any implicit knowledge of how S3 services are accessed using HTTP
   protocols.
 - To be usable from multithreaded code
 - To be usable by code which wants to process multiple S3 requests
   simultaneously from a single thread
 - To be usable in the simple, straightforward way using sequentialized
   blocking requests</description>
  <packager></packager>
  <url>http://sourceforge.net/projects/reallibs3</url>
  <time file="1787868317" build="1777747754"/>
  <size package="254446" installed="506097" archive="506616"/>
  <location href="armv7hl/libs3-devel-4.1-33.13.armv7hl.rpm"/>
  <format>
    <rpm:license>GPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>libs3-4.1-33.13.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8441"/>
    <rpm:provides>
      <rpm:entry name="libs3-devel" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
      <rpm:entry name="libs3-devel(armv7hl-32)" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libs3-4" flags="EQ" epoch="0" ver="4.1" rel="33.13"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libxenstore_uvp3_0</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">0f44f153edcc7c2ca9f3b8957943014f460c2bac702ea36327cc1f22b28ff2969663e34c9acd82026b1b7ee26bd998d8fc52b8a33880a6c51eb92e8ff2af33cf</checksum>
  <summary>UVP libxenstore with XS_WEAK_WRITE support</summary>
  <description>The UVP hypervisor has some features on top of standard Xen, one of which is a weak write operation.
This patched version of libxenstore (libxenstore_uvp) contains the userspace support for this.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724792606" build="1528784111"/>
  <size package="19964" installed="73928" archive="74348"/>
  <location href="aarch64/libxenstore_uvp3_0-3.0.0-39.66.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System Environment/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8069"/>
    <rpm:provides>
      <rpm:entry name="libxenstore_uvp.so.3.0()(64bit)"/>
      <rpm:entry name="libxenstore_uvp3_0" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="libxenstore_uvp3_0(aarch-64)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)(64bit)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>libxenstore_uvp3_0</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">52e8e6d4429687abc6dba790f681b1a1481afdc7c6b1ad5ef6d0d513721c87f7bb45745561cac8b6ecbddb58368ab3789ccf9d4e4631b6746684af8f4c9978af</checksum>
  <summary>UVP libxenstore with XS_WEAK_WRITE support</summary>
  <description>The UVP hypervisor has some features on top of standard Xen, one of which is a weak write operation.
This patched version of libxenstore (libxenstore_uvp) contains the userspace support for this.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724787638" build="1528784111"/>
  <size package="18996" installed="28204" archive="28620"/>
  <location href="armv7hl/libxenstore_uvp3_0-3.0.0-39.66.armv7hl.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System Environment/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8097"/>
    <rpm:provides>
      <rpm:entry name="libxenstore_uvp.so.3.0"/>
      <rpm:entry name="libxenstore_uvp3_0" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="libxenstore_uvp3_0(armv7hl-32)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/sbin/ldconfig" pre="1"/>
      <rpm:entry name="/sbin/ldconfig"/>
      <rpm:entry name="ld-linux-armhf.so.3"/>
      <rpm:entry name="ld-linux-armhf.so.3(GLIBC_2.4)"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.5)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>network-hotplug</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.4" rel="2.5"/>
  <checksum type="sha512" pkgid="YES">739add93ab0ed54a57cd7ad4e3fe167a2832d90aebfd2f84a20af990b29807e4352341623200a40920b7ace791f461939c61fb3c588f0eda86feb11ba9c3e05c</checksum>
  <summary>Network interface auto-configuration script</summary>
  <description>The package provides scripts for the automatic configuration of network
interfaces of VM while they are running. It creates the ifcfg of the interfaces
and executes DHCP for them.

Authors: Robert Neumann</description>
  <packager></packager>
  <url></url>
  <time file="1787868951" build="1601639157"/>
  <size package="9284" installed="1809" archive="2520"/>
  <location href="noarch/network-hotplug-0.4-2.5.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>network-hotplug-0.4-2.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8297"/>
    <rpm:provides>
      <rpm:entry name="network-hotplug" flags="EQ" epoch="0" ver="0.4" rel="2.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="systemd"/>
      <rpm:entry name="udev"/>
    </rpm:requires>
    <file type="dir">/etc/sysconfig/network</file>
    <file type="dir">/etc/sysconfig/network/scripts</file>
    <file>/etc/sysconfig/network/scripts/network.hotplug</file>
    <file>/etc/udev/rules.d/60-net.rules</file>
  </format>
</package>
<package type="rpm">
  <name>network-hotplug</name>
  <arch>src</arch>
  <version epoch="0" ver="0.4" rel="2.5"/>
  <checksum type="sha512" pkgid="YES">9df811bf93cbd48d116fdf3c0fb4d8c096a5fa637003ba3b1428fcc5edad3c84558841354af511dad9823361ee1092e80faf5ba446e2e6176e9e393eacacdeae</checksum>
  <summary>Network interface auto-configuration script</summary>
  <description>The package provides scripts for the automatic configuration of network
interfaces of VM while they are running. It creates the ifcfg of the interfaces
and executes DHCP for them.

Authors: Robert Neumann</description>
  <packager></packager>
  <url></url>
  <time file="1787868951" build="1601639157"/>
  <size package="12176" installed="4702" archive="5216"/>
  <location href="src/network-hotplug-0.4-2.5.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0+</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="10195"/>
    <rpm:provides>
      <rpm:entry name="network-hotplug" flags="EQ" epoch="0" ver="0.4" rel="2.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="systemd"/>
      <rpm:entry name="udev"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>otc-tools</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.8.34" rel="10.17"/>
  <checksum type="sha512" pkgid="YES">35f5c0d1bb7fe1c700e9548e0d8fd8f9b379360d615289151367cf79d13fbb9e51f74343f62fcfc7cece046dd783b66296fcfe8a8a4fd272d9b79479c37a9f75</checksum>
  <summary>Simple shell tool to access the OTC APIs</summary>
  <description>This is a shell script that uses curl and jq to talk to the
Open Telekom Cloud APIs (OpenStack and OTC specific APIs).
It's a nice demonstrator to see how the API works and allows
for testing and simple automation. It's not recommended for
productive use.

For more advanced usage, we recommend the native OpenStack
CLI tools and the -otcextensions.

Authors: Zsolt Nagy, Kurt Garloff, Christian Kortwich</description>
  <packager></packager>
  <url>https://github.com/OpenTelekomCloud/otc-tools/</url>
  <time file="1723017114" build="1660576149"/>
  <size package="73070" installed="315146" archive="316260"/>
  <location href="noarch/otc-tools-0.8.34-10.17.noarch.rpm"/>
  <format>
    <rpm:license>CC-BY-SA-4.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>otc-tools-0.8.34-10.17.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="10529"/>
    <rpm:provides>
      <rpm:entry name="otc-tools" flags="EQ" epoch="0" ver="0.8.34" rel="10.17"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/bash"/>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/sbin/update-alternatives" pre="1"/>
      <rpm:entry name="/usr/sbin/update-alternatives"/>
      <rpm:entry name="curl"/>
      <rpm:entry name="jq"/>
    </rpm:requires>
    <rpm:recommends>
      <rpm:entry name="libs3-4"/>
    </rpm:recommends>
    <file type="ghost">/etc/alternatives/otc</file>
    <file type="ghost">/usr/bin/otc</file>
    <file>/usr/bin/otc.sh</file>
    <file>/usr/bin/scp_otc.sh</file>
    <file>/usr/bin/ssh_otc.sh</file>
  </format>
</package>
<package type="rpm">
  <name>otc-tools</name>
  <arch>src</arch>
  <version epoch="0" ver="0.8.34" rel="10.17"/>
  <checksum type="sha512" pkgid="YES">de9ce746e7104b045d4be677f94a9b92b674efc1f050c099b1c3541bac48742efd3cdb9679e6d975d9620e4f7d2eaab718948fc01244c70e794be1ca40d88f7e</checksum>
  <summary>Simple shell tool to access the OTC APIs</summary>
  <description>This is a shell script that uses curl and jq to talk to the
Open Telekom Cloud APIs (OpenStack and OTC specific APIs).
It's a nice demonstrator to see how the API works and allows
for testing and simple automation. It's not recommended for
productive use.

For more advanced usage, we recommend the native OpenStack
CLI tools and the -otcextensions.

Authors: Zsolt Nagy, Kurt Garloff, Christian Kortwich</description>
  <packager></packager>
  <url>https://github.com/OpenTelekomCloud/otc-tools/</url>
  <time file="1723017114" build="1660576149"/>
  <size package="140021" installed="100028" archive="100704"/>
  <location href="src/otc-tools-0.8.34-10.17.src.rpm"/>
  <format>
    <rpm:license>CC-BY-SA-4.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Networking/Utilities</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="60365"/>
    <rpm:provides>
      <rpm:entry name="otc-tools" flags="EQ" epoch="0" ver="0.8.34" rel="10.17"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="jq"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python-d2to1</name>
  <arch>src</arch>
  <version epoch="0" ver="0.2.12.post1" rel="4.7"/>
  <checksum type="sha512" pkgid="YES">419d752450b5d70957bad4319a6449f41e17ad84019706a66250e1a2c2170620100c2b963aba414442aedc2f50c8c363f5b24ed3d0a6183d34ab366eeb63ab64</checksum>
  <summary>Allows using distutils2-like setup.cfg with a distribute/setuptools</summary>
  <description>d2to1 (the 'd' is for 'distutils') allows using distutils2-like setup.cfg
files for a package's metadata with a distribute/setuptools setup.py script.
It works by providing a distutils2-formatted setup.cfg file containing all of
a package's metadata, and a very minimal setup.py which will slurp its arguments from the setup.cfg.</description>
  <packager></packager>
  <url>https://pypi.python.org/pypi/d2to1</url>
  <time file="1787706719" build="1777803499"/>
  <size package="61777" installed="42077" archive="42616"/>
  <location href="src/python-d2to1-0.2.12.post1-4.7.src.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="22493"/>
    <rpm:provides>
      <rpm:entry name="python314-d2to1" flags="EQ" epoch="0" ver="0.2.12.post1" rel="4.7"/>
      <rpm:entry name="python313-d2to1" flags="EQ" epoch="0" ver="0.2.12.post1" rel="4.7"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="fdupes"/>
      <rpm:entry name="python-rpm-macros"/>
      <rpm:entry name="python313-setuptools"/>
      <rpm:entry name="python314-setuptools"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python3-objectpath</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.5" rel="5.61"/>
  <checksum type="sha512" pkgid="YES">eaebdb090bbf034bc9234ca56aab957ca4ceec1c1249cc7c8cca538c74e4c10104fd0f899341a7f92f4768d1bdd6cbcf2a19b5df84814b60171045739a81ef16</checksum>
  <summary>The agile NoSQL query language for semi-structured data</summary>
  <description>ObjectPath is a query language similar to XPath or JSONPath, but much more
powerful thanks to embedded arithmetic calculations, comparison mechanisms and
built-in functions. This makes the language more like SQL in terms of
expressiveness, but it works over JSON documents rather than relations.
ObjectPath can be considered a full-featured expression language. Besides
selector mechanism there is also boolean logic, type system and string
concatenation available. On top of that, the language implementations (Python
at the moment; Javascript is in beta!) are secure and relatively fast.</description>
  <packager></packager>
  <url>http://github.com/dsc/bunch</url>
  <time file="1743124307" build="1528443813"/>
  <size package="56008" installed="131184" archive="137688"/>
  <location href="noarch/python3-objectpath-0.5-5.61.noarch.rpm"/>
  <format>
    <rpm:license>AGPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>python3-objectpath-0.5-5.61.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="12377"/>
    <rpm:provides>
      <rpm:entry name="python3-objectpath" flags="EQ" epoch="0" ver="0.5" rel="5.61"/>
      <rpm:entry name="python3.13dist(objectpath)" flags="EQ" epoch="0" ver="0.5"/>
      <rpm:entry name="python3dist(objectpath)" flags="EQ" epoch="0" ver="0.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/python3"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
    </rpm:requires>
    <file>/usr/bin/objectpath</file>
  </format>
</package>
<package type="rpm">
  <name>python3-objectpath</name>
  <arch>src</arch>
  <version epoch="0" ver="0.5" rel="5.61"/>
  <checksum type="sha512" pkgid="YES">3cfa73cd1441f1bd41d8efaab75c92e985aa913731f4ab87abf8976b384ab86ae800c594e345806f19220d4fc7f6c0ff74cbc558fa21ae2605430aee7bb71088</checksum>
  <summary>The agile NoSQL query language for semi-structured data</summary>
  <description>ObjectPath is a query language similar to XPath or JSONPath, but much more
powerful thanks to embedded arithmetic calculations, comparison mechanisms and
built-in functions. This makes the language more like SQL in terms of
expressiveness, but it works over JSON documents rather than relations.
ObjectPath can be considered a full-featured expression language. Besides
selector mechanism there is also boolean logic, type system and string
concatenation available. On top of that, the language implementations (Python
at the moment; Javascript is in beta!) are secure and relatively fast.</description>
  <packager></packager>
  <url>http://github.com/dsc/bunch</url>
  <time file="1743124307" build="1528443813"/>
  <size package="27221" installed="19303" archive="19700"/>
  <location href="src/python3-objectpath-0.5-5.61.src.rpm"/>
  <format>
    <rpm:license>AGPL-3.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="9008"/>
    <rpm:provides>
      <rpm:entry name="python3-objectpath" flags="EQ" epoch="0" ver="0.5" rel="5.61"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python3-devel"/>
      <rpm:entry name="python3-setuptools"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python3-otcclient</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="0.3.64" rel="7.6"/>
  <checksum type="sha512" pkgid="YES">797e460f36e44ad5d2c47ec5853f4ddae40cd32db015bbc49fb1afcec3cd6ac5e0c26ea3fa6fd144b1d7562dc7c96a739407cce2cc96ead254b8251783645b53</checksum>
  <summary>OpenTelekomCloud API tool (OpenStack and OTC-specific APIs)</summary>
  <description>The standard API tool for OpenTelekomCloud.
This tool provides a command line interface otc.py for the APIs of OpenTelekomCloud.
In contrast to the OpenStack python CLI client tools, it does provide a broader
range of supported APIs (some of which are not standardized from OpenStack but
OTC specific) as well as offering a syntax that somewhat resembles the AWS
tools.</description>
  <packager></packager>
  <url>http://github.com/OpenTelekomCloud/python-otcclient</url>
  <time file="1787658121" build="1538021624"/>
  <size package="171171" installed="748990" archive="794952"/>
  <location href="aarch64/python3-otcclient-0.3.64-7.6.aarch64.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>python3-otcclient-0.3.64-7.6.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="44313"/>
    <rpm:provides>
      <rpm:entry name="python3-otcclient" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3-otcclient(aarch-64)" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3.13dist(python-otcclient)" flags="EQ" epoch="0" ver="0.3.64"/>
      <rpm:entry name="python3dist(python-otcclient)" flags="EQ" epoch="0" ver="0.3.64"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python3"/>
      <rpm:entry name="/usr/sbin/update-alternatives" pre="1"/>
      <rpm:entry name="/usr/sbin/update-alternatives"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="python3-Jinja2" flags="GE" epoch="0" ver="2.7"/>
      <rpm:entry name="python3-PrettyTable" flags="GE" epoch="0" ver="0.7.2"/>
      <rpm:entry name="python3-boto3" flags="GE" epoch="0" ver="1.3.0"/>
      <rpm:entry name="python3-botocore" flags="GE" epoch="0" ver="1.4.28"/>
      <rpm:entry name="python3-decorator" flags="GE" epoch="0" ver="3.4.0"/>
      <rpm:entry name="python3-docutils" flags="GE" epoch="0" ver="0.11"/>
      <rpm:entry name="python3-jmespath" flags="GE" epoch="0" ver="0.7.1"/>
      <rpm:entry name="python3-jsonpath-rw" flags="GE" epoch="0" ver="1.4.0"/>
      <rpm:entry name="python3-objectpath" flags="GE" epoch="0" ver="0.5"/>
      <rpm:entry name="python3-ply" flags="GE" epoch="0" ver="3.8"/>
      <rpm:entry name="python3-python-dateutil" flags="GE" epoch="0" ver="2.4.2"/>
      <rpm:entry name="python3-requests" flags="GE" epoch="0" ver="2.7.0"/>
      <rpm:entry name="python3-six" flags="GE" epoch="0" ver="1.9.0"/>
    </rpm:requires>
    <rpm:suggests>
      <rpm:entry name="libs3-4"/>
    </rpm:suggests>
    <file type="ghost">/etc/alternatives/otc</file>
    <file type="ghost">/usr/bin/otc</file>
    <file>/usr/bin/otc.py</file>
    <file>/usr/lib/python3.13/site-packages/otcclient/bin/__init__.py</file>
    <file type="dir">/usr/lib/python3.13/site-packages/otcclient/bin/__pycache__</file>
    <file>/usr/lib/python3.13/site-packages/otcclient/bin/__pycache__/__init__.cpython-313.pyc</file>
  </format>
</package>
<package type="rpm">
  <name>python3-otcclient</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="0.3.64" rel="7.6"/>
  <checksum type="sha512" pkgid="YES">0ca272522191558afb88bf4ab9f1d8b5addec76c5df6619e8281416e1a3dc72258b42a70160f389ff1eb370a1447970582b354c1d9a513ecc52026eb02b3e4e7</checksum>
  <summary>OpenTelekomCloud API tool (OpenStack and OTC-specific APIs)</summary>
  <description>The standard API tool for OpenTelekomCloud.
This tool provides a command line interface otc.py for the APIs of OpenTelekomCloud.
In contrast to the OpenStack python CLI client tools, it does provide a broader
range of supported APIs (some of which are not standardized from OpenStack but
OTC specific) as well as offering a syntax that somewhat resembles the AWS
tools.</description>
  <packager></packager>
  <url>http://github.com/OpenTelekomCloud/python-otcclient</url>
  <time file="1787658360" build="1538021624"/>
  <size package="171143" installed="748990" archive="794952"/>
  <location href="armv7hl/python3-otcclient-0.3.64-7.6.armv7hl.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>python3-otcclient-0.3.64-7.6.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="44285"/>
    <rpm:provides>
      <rpm:entry name="python3-otcclient" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3-otcclient(armv7hl-32)" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3.13dist(python-otcclient)" flags="EQ" epoch="0" ver="0.3.64"/>
      <rpm:entry name="python3dist(python-otcclient)" flags="EQ" epoch="0" ver="0.3.64"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/bin/sh" pre="1"/>
      <rpm:entry name="/bin/sh"/>
      <rpm:entry name="/usr/bin/python3"/>
      <rpm:entry name="/usr/sbin/update-alternatives" pre="1"/>
      <rpm:entry name="/usr/sbin/update-alternatives"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="python3-Jinja2" flags="GE" epoch="0" ver="2.7"/>
      <rpm:entry name="python3-PrettyTable" flags="GE" epoch="0" ver="0.7.2"/>
      <rpm:entry name="python3-boto3" flags="GE" epoch="0" ver="1.3.0"/>
      <rpm:entry name="python3-botocore" flags="GE" epoch="0" ver="1.4.28"/>
      <rpm:entry name="python3-decorator" flags="GE" epoch="0" ver="3.4.0"/>
      <rpm:entry name="python3-docutils" flags="GE" epoch="0" ver="0.11"/>
      <rpm:entry name="python3-jmespath" flags="GE" epoch="0" ver="0.7.1"/>
      <rpm:entry name="python3-jsonpath-rw" flags="GE" epoch="0" ver="1.4.0"/>
      <rpm:entry name="python3-objectpath" flags="GE" epoch="0" ver="0.5"/>
      <rpm:entry name="python3-ply" flags="GE" epoch="0" ver="3.8"/>
      <rpm:entry name="python3-python-dateutil" flags="GE" epoch="0" ver="2.4.2"/>
      <rpm:entry name="python3-requests" flags="GE" epoch="0" ver="2.7.0"/>
      <rpm:entry name="python3-six" flags="GE" epoch="0" ver="1.9.0"/>
    </rpm:requires>
    <rpm:suggests>
      <rpm:entry name="libs3-4"/>
    </rpm:suggests>
    <file type="ghost">/etc/alternatives/otc</file>
    <file type="ghost">/usr/bin/otc</file>
    <file>/usr/bin/otc.py</file>
    <file>/usr/lib/python3.13/site-packages/otcclient/bin/__init__.py</file>
    <file type="dir">/usr/lib/python3.13/site-packages/otcclient/bin/__pycache__</file>
    <file>/usr/lib/python3.13/site-packages/otcclient/bin/__pycache__/__init__.cpython-313.pyc</file>
  </format>
</package>
<package type="rpm">
  <name>python3-otcclient</name>
  <arch>src</arch>
  <version epoch="0" ver="0.3.64" rel="7.6"/>
  <checksum type="sha512" pkgid="YES">2ef61f898cebcb3ee05b0d196b13653f1b4a72742dc2bc4379f96dc8a1f5911ec1aad18fe7738d8856476491890d038f35972227abc5abed135ed39b9f1d139f</checksum>
  <summary>OpenTelekomCloud API tool (OpenStack and OTC-specific APIs)</summary>
  <description>The standard API tool for OpenTelekomCloud.
This tool provides a command line interface otc.py for the APIs of OpenTelekomCloud.
In contrast to the OpenStack python CLI client tools, it does provide a broader
range of supported APIs (some of which are not standardized from OpenStack but
OTC specific) as well as offering a syntax that somewhat resembles the AWS
tools.</description>
  <packager></packager>
  <url>http://github.com/OpenTelekomCloud/python-otcclient</url>
  <time file="1787658360" build="1538021624"/>
  <size package="74565" installed="61393" archive="62052"/>
  <location href="src/python3-otcclient-0.3.64-7.6.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="17120"/>
    <rpm:provides>
      <rpm:entry name="python3-otcclient" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3-otcclient-debuginfo" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
      <rpm:entry name="python3-otcclient-debugsource" flags="EQ" epoch="0" ver="0.3.64" rel="7.6"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="dos2unix"/>
      <rpm:entry name="python3-devel"/>
      <rpm:entry name="python3-setuptools"/>
      <rpm:entry name="unzip"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>python313-d2to1</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.2.12.post1" rel="4.7"/>
  <checksum type="sha512" pkgid="YES">e005f8dcc6a75a4bf06906310cf9afea166f007fdf8a0a4af4017b76579c2c3387aa1375b275db803854bba3c4265ff69539f56796dc132211cfea0c801609ad</checksum>
  <summary>Allows using distutils2-like setup.cfg with a distribute/setuptools</summary>
  <description>d2to1 (the 'd' is for 'distutils') allows using distutils2-like setup.cfg
files for a package's metadata with a distribute/setuptools setup.py script.
It works by providing a distutils2-formatted setup.cfg file containing all of
a package's metadata, and a very minimal setup.py which will slurp its arguments from the setup.cfg.</description>
  <packager></packager>
  <url>https://pypi.python.org/pypi/d2to1</url>
  <time file="1787706719" build="1777803499"/>
  <size package="63719" installed="163861" archive="170316"/>
  <location href="noarch/python313-d2to1-0.2.12.post1-4.7.noarch.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>python-d2to1-0.2.12.post1-4.7.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="15305"/>
    <rpm:provides>
      <rpm:entry name="python3-d2to1" flags="EQ" epoch="0" ver="0.2.12.post1" rel="4.7"/>
      <rpm:entry name="python3.13dist(d2to1)" flags="EQ" epoch="0" ver="0.2.12^post1"/>
      <rpm:entry name="python313-d2to1" flags="EQ" epoch="0" ver="0.2.12.post1" rel="4.7"/>
      <rpm:entry name="python3dist(d2to1)" flags="EQ" epoch="0" ver="0.2.12^post1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
    </rpm:requires>
    <rpm:obsoletes>
      <rpm:entry name="python3-d2to1" flags="LT" epoch="0" ver="0.2.12.post1" rel="4.7"/>
    </rpm:obsoletes>
  </format>
</package>
<package type="rpm">
  <name>python314-d2to1</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.2.12.post1" rel="4.7"/>
  <checksum type="sha512" pkgid="YES">b80366174a807955b30832ca391241fab3cfad04476fef995a7192f44b57135f15028b2667ad1aac2410a72585ef11d2af7e683e8d4c19439f78cdbfcddc1fc7</checksum>
  <summary>Allows using distutils2-like setup.cfg with a distribute/setuptools</summary>
  <description>d2to1 (the 'd' is for 'distutils') allows using distutils2-like setup.cfg
files for a package's metadata with a distribute/setuptools setup.py script.
It works by providing a distutils2-formatted setup.cfg file containing all of
a package's metadata, and a very minimal setup.py which will slurp its arguments from the setup.cfg.</description>
  <packager></packager>
  <url>https://pypi.python.org/pypi/d2to1</url>
  <time file="1787706719" build="1777803499"/>
  <size package="64032" installed="165334" archive="171788"/>
  <location href="noarch/python314-d2to1-0.2.12.post1-4.7.noarch.rpm"/>
  <format>
    <rpm:license>BSD-3-Clause</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Unspecified</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>python-d2to1-0.2.12.post1-4.7.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="15189"/>
    <rpm:provides>
      <rpm:entry name="python3.14dist(d2to1)" flags="EQ" epoch="0" ver="0.2.12^post1"/>
      <rpm:entry name="python314-d2to1" flags="EQ" epoch="0" ver="0.2.12.post1" rel="4.7"/>
      <rpm:entry name="python3dist(d2to1)" flags="EQ" epoch="0" ver="0.2.12^post1"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.14"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>s3cmd</name>
  <arch>noarch</arch>
  <version epoch="0" ver="2.4.0" rel="12.8"/>
  <checksum type="sha512" pkgid="YES">70379d9c594eae42df6501acb71ef6b7eaa54259bfb7d394a6769e5685cbdd585c120126c8fbfb8b28804dbba10bd80b1fe8867a895b1da6da18bbd80b8bf893</checksum>
  <summary>Command line tool for managing Amazon S3 and CloudFront services</summary>
  <description>S3cmd (`s3cmd`) is a free command line tool and client for uploading, retrieving
and managing data in Amazon S3 and other cloud storage service providers that use
the S3 protocol, such as Ceph, Google Cloud Storage or DreamHost DreamObjects. It is
best suited for power users who are familiar with command line programs.</description>
  <packager></packager>
  <url>http://s3tools.org/s3cmd</url>
  <time file="1787658016" build="1750226091"/>
  <size package="247352" installed="1010322" archive="1025016"/>
  <location href="noarch/s3cmd-2.4.0-12.8.noarch.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System/Management</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>s3cmd-2.4.0-12.8.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="26781"/>
    <rpm:provides>
      <rpm:entry name="python3.13dist(s3cmd)" flags="EQ" epoch="0" ver="2.4"/>
      <rpm:entry name="python3dist(s3cmd)" flags="EQ" epoch="0" ver="2.4"/>
      <rpm:entry name="s3cmd" flags="EQ" epoch="0" ver="2.4.0" rel="12.8"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/python3.13"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="python3-magic"/>
      <rpm:entry name="python3-python-dateutil"/>
    </rpm:requires>
    <file>/usr/bin/s3cmd</file>
  </format>
</package>
<package type="rpm">
  <name>s3cmd</name>
  <arch>src</arch>
  <version epoch="0" ver="2.4.0" rel="12.8"/>
  <checksum type="sha512" pkgid="YES">88cdf5a2f721f5713539f4f6e10a98ecc0e71633ea7695fc0d1c9f0c434564c129dda3049cd85bdc67acc270de777f54dc4d53d784ef467d0d49c0db775dc123</checksum>
  <summary>Command line tool for managing Amazon S3 and CloudFront services</summary>
  <description>S3cmd (`s3cmd`) is a free command line tool and client for uploading, retrieving
and managing data in Amazon S3 and other cloud storage service providers that use
the S3 protocol, such as Ceph, Google Cloud Storage or DreamHost DreamObjects. It is
best suited for power users who are familiar with command line programs.</description>
  <packager></packager>
  <url>http://s3tools.org/s3cmd</url>
  <time file="1787658016" build="1750226091"/>
  <size package="499441" installed="476465" archive="476848"/>
  <location href="src/s3cmd-2.4.0-12.8.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0-only</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System/Management</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="27852"/>
    <rpm:provides>
      <rpm:entry name="s3cmd" flags="EQ" epoch="0" ver="2.4.0" rel="12.8"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="fdupes"/>
      <rpm:entry name="python-rpm-macros"/>
      <rpm:entry name="python3-devel"/>
      <rpm:entry name="python3-pip"/>
      <rpm:entry name="python3-setuptools"/>
      <rpm:entry name="python3-wheel"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>shyaml</name>
  <arch>noarch</arch>
  <version epoch="0" ver="0.6.2" rel="12.5"/>
  <checksum type="sha512" pkgid="YES">de6e25f9c59db8fdb3b9d4b9cd1fb55b8860ab0e565be0708dceb9d61eab0d1581e28e16062e4dcb6a018052f15f512171c31efd9105e3f5c54a051fb4cb2251</checksum>
  <summary>Shell YAML parser</summary>
  <description>Simple scripts that allow read access to YAML files through command line.
This can be handy, if you want to get access to YAML data in your shell scripts.

This scripts supports only read access and it might not support all the
subtilties of YAML specification. But it should support some handy basic query
of YAML file.</description>
  <packager></packager>
  <url>https://github.com/0k/shyaml</url>
  <time file="1787582907" build="1777794434"/>
  <size package="25569" installed="84027" archive="86532"/>
  <location href="noarch/shyaml-0.6.2-12.5.noarch.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>shyaml-0.6.2-12.5.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="9621"/>
    <rpm:provides>
      <rpm:entry name="python3.13dist(shyaml)" flags="EQ" epoch="0" ver="0.6.2~~dev202601300540"/>
      <rpm:entry name="python3dist(shyaml)" flags="EQ" epoch="0" ver="0.6.2~~dev202601300540"/>
      <rpm:entry name="shyaml" flags="EQ" epoch="0" ver="0.6.2" rel="12.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="/usr/bin/python3"/>
      <rpm:entry name="python(abi)" flags="EQ" epoch="0" ver="3.13"/>
      <rpm:entry name="python3-PyYAML"/>
    </rpm:requires>
    <file>/usr/bin/shyaml</file>
  </format>
</package>
<package type="rpm">
  <name>shyaml</name>
  <arch>src</arch>
  <version epoch="0" ver="0.6.2" rel="12.5"/>
  <checksum type="sha512" pkgid="YES">1e079fd484702f3bc23e7f47bc9dd26c84101a9b5ced4a8840a2c02aed402b7dd33ac96d1941f024631f9c090787233bdc26ef4a3bd6dcd8daeaaf4ff34338a5</checksum>
  <summary>Shell YAML parser</summary>
  <description>Simple scripts that allow read access to YAML files through command line.
This can be handy, if you want to get access to YAML data in your shell scripts.

This scripts supports only read access and it might not support all the
subtilties of YAML specification. But it should support some handy basic query
of YAML file.</description>
  <packager></packager>
  <url>https://github.com/0k/shyaml</url>
  <time file="1787582907" build="1777794434"/>
  <size package="208920" installed="200240" archive="200756"/>
  <location href="src/shyaml-0.6.2-12.5.src.rpm"/>
  <format>
    <rpm:license>MIT</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Languages/Python</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="10417"/>
    <rpm:provides>
      <rpm:entry name="shyaml" flags="EQ" epoch="0" ver="0.6.2" rel="12.5"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="git"/>
      <rpm:entry name="python3-d2to1"/>
      <rpm:entry name="python3-devel"/>
      <rpm:entry name="python3-setuptools"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>xenstore_uvp</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">c8d562e760baba1293047bd1172d2cc96750982c8921545069b69e75268dff893606f78d9b8b57f97ddcc7062abe31950ce8a51f637bde1bd48775e50305e05f</checksum>
  <summary>UVP xenstore tools with XS_WEAK_WRITE support</summary>
  <description>The UVP hypervisor has some features on top of standard Xen, one of which is a weak write operation.
These utils take advantage of a patched version of libxenstore to support this.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724792606" build="1528784111"/>
  <size package="17509" installed="143272" archive="143668"/>
  <location href="aarch64/xenstore_uvp-3.0.0-39.66.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System Environment/Base</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8197"/>
    <rpm:provides>
      <rpm:entry name="xenstore_uvp" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="xenstore_uvp(aarch-64)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ld-linux-aarch64.so.1()(64bit)"/>
      <rpm:entry name="ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)"/>
      <rpm:entry name="libxenstore_uvp.so.3.0()(64bit)"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)(64bit)"/>
    </rpm:requires>
    <file>/bin/xenstore-control_uvp</file>
    <file>/bin/xenstore_uvp</file>
  </format>
</package>
<package type="rpm">
  <name>xenstore_uvp</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">891f7714cf8766aaa2f5080a3bb10c144f84c9286f628949dd18b79a5ffd459e6d815e09fd915e2e02512205cb96232e0b1ebf8d7633ed4a08d417da1953291e</checksum>
  <summary>UVP xenstore tools with XS_WEAK_WRITE support</summary>
  <description>The UVP hypervisor has some features on top of standard Xen, one of which is a weak write operation.
These utils take advantage of a patched version of libxenstore to support this.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724787638" build="1528784111"/>
  <size package="17026" installed="26032" archive="26428"/>
  <location href="armv7hl/xenstore_uvp-3.0.0-39.66.armv7hl.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System Environment/Base</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="8173"/>
    <rpm:provides>
      <rpm:entry name="xenstore_uvp" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="xenstore_uvp(armv7hl-32)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="ld-linux-armhf.so.3"/>
      <rpm:entry name="ld-linux-armhf.so.3(GLIBC_2.4)"/>
      <rpm:entry name="libgcc_s.so.1"/>
      <rpm:entry name="libgcc_s.so.1(GCC_3.5)"/>
      <rpm:entry name="libxenstore_uvp.so.3.0"/>
      <rpm:entry name="libc.so.6(GLIBC_2.34)"/>
    </rpm:requires>
    <file>/bin/xenstore-control_uvp</file>
    <file>/bin/xenstore_uvp</file>
  </format>
</package>
<package type="rpm">
  <name>xenstore_uvp</name>
  <arch>src</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">d3a52e79ec03a33925e442ea89e3da6e90b88e6073de5b48235589bdea793c467e2ced1ed9a8a15f85eb7d88bac29a089f0bf1a5cae80068cecbb1e287f67137</checksum>
  <summary>UVP xenstore tools with XS_WEAK_WRITE support</summary>
  <description>The UVP hypervisor has some features on top of standard Xen, one of which is a weak write operation.
These utils take advantage of a patched version of libxenstore to support this.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724787638" build="1528784111"/>
  <size package="10427224" installed="10443865" archive="10445028"/>
  <location href="src/xenstore_uvp-3.0.0-39.66.src.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>System Environment/Base</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm></rpm:sourcerpm>
    <rpm:header-range start="4504" end="12317"/>
    <rpm:provides>
      <rpm:entry name="xenstore_uvp" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="libxenstore_uvp3_0" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="xenstore_uvp-devel" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="python"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>xenstore_uvp-devel</name>
  <arch>aarch64</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">b1ef42358c8f0db1f69e321a749f59488f81497f96cab3b2c495c4db7efedab08a59003220751d37db01042302cf7f8ab22c8517d58e3c88bfe71c37c0d9b92b</checksum>
  <summary>Header and devel files for libxenstore_uvp</summary>
  <description>This package contains the header files and the .so library to link
against for apps that want to use libxenstore_uvp.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724792607" build="1528784111"/>
  <size package="96191" installed="414977" archive="424328"/>
  <location href="aarch64/xenstore_uvp-devel-3.0.0-39.66.aarch64.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14873"/>
    <rpm:provides>
      <rpm:entry name="xenstore_uvp-devel" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="xenstore_uvp-devel(aarch-64)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libxenstore_uvp3_0" flags="EQ" epoch="0" ver="3.0.0"/>
    </rpm:requires>
  </format>
</package>
<package type="rpm">
  <name>xenstore_uvp-devel</name>
  <arch>armv7hl</arch>
  <version epoch="0" ver="3.0.0" rel="39.66"/>
  <checksum type="sha512" pkgid="YES">6c2b492122d0ead74ed47894a758f863f629f2da08bf88f96cc1901911409935545f71445999de1a730a8ce971aa711cd109414e368e6c30639e9dc50acf64de</checksum>
  <summary>Header and devel files for libxenstore_uvp</summary>
  <description>This package contains the header files and the .so library to link
against for apps that want to use libxenstore_uvp.</description>
  <packager></packager>
  <url>http://bits.xensource.com/oss-xen/release/4.1.6.1/xen-4.1.6.1.tar.gz</url>
  <time file="1724787638" build="1528784111"/>
  <size package="96160" installed="414977" archive="424324"/>
  <location href="armv7hl/xenstore_uvp-devel-3.0.0-39.66.armv7hl.rpm"/>
  <format>
    <rpm:license>GPL-2.0</rpm:license>
    <rpm:vendor>obs://build.opensuse.org/Cloud:OTC</rpm:vendor>
    <rpm:group>Development/Libraries</rpm:group>
    <rpm:buildhost>reproducible</rpm:buildhost>
    <rpm:sourcerpm>xenstore_uvp-3.0.0-39.66.src.rpm</rpm:sourcerpm>
    <rpm:header-range start="4504" end="14845"/>
    <rpm:provides>
      <rpm:entry name="xenstore_uvp-devel" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
      <rpm:entry name="xenstore_uvp-devel(armv7hl-32)" flags="EQ" epoch="0" ver="3.0.0" rel="39.66"/>
    </rpm:provides>
    <rpm:requires>
      <rpm:entry name="libxenstore_uvp3_0" flags="EQ" epoch="0" ver="3.0.0"/>
    </rpm:requires>
  </format>
</package>
</metadata>